Diving Accessories FAQs
Answers about diving hoods, caps, gear bags, packing and care.
Find practical answers about diving hoods, caps and gear bags, including fit, packing, transport and care.
Browse all BURNSURF FAQ topics
What size dive bag do I need?
List the equipment that must go in the bag and compare its packed dimensions with the bag's stated internal dimensions. Fins often determine the minimum length, while a wetsuit, boots, mask and accessories determine the remaining volume. Do not choose by a “large” or “travel” label alone because manufacturers measure capacity differently. Leave enough room to pack equipment without sharply bending fin blades or crushing the mask. Browse the current diving gear bags and confirm the dimensions of the selected model.
Should I choose a mesh or closed dive bag?
A mesh bag allows drainage and ventilation and can be practical for carrying wet equipment over a short distance. A closed bag can contain drips and offers more separation from other luggage, but wet gear should not be left sealed inside for long periods. Some divers use a main travel bag plus a separate mesh bag at the dive site. Choose according to transport, drainage, protection and storage needs rather than assuming one construction works for every trip.
How do I know if my fins will fit in a dive bag?
Measure the fins from the end of the foot pocket to the blade tip and compare that length with the bag's usable internal length, not only its external dimensions. Also allow space for the width and shape of the foot pockets and straps. Long freediving fins may require a dedicated long bag and should not be forced into a shorter bag or sharply bent. If the product page does not provide internal dimensions, ask for them before ordering.
Can I put a wet wetsuit in a dive bag?
Yes, for transport when the bag is intended for wet equipment, but remove the wetsuit promptly after the trip. Drain excess water, keep it away from items that should remain dry and do not leave it sealed in a hot vehicle or unventilated bag. Once home, rinse and dry the wetsuit according to its care instructions and dry the bag as well. A bag described as water resistant or waterproof should still be checked for its exact closure and leakage limitations.
Are diving gear bags waterproof?
Not all dive bags are waterproof. Mesh bags are designed to drain, while coated or closed bags may provide different levels of water resistance. A product title or photograph does not establish that seams, zippers and closures are watertight or suitable for submersion. Check the exact material, seam construction, closure and manufacturer's water-protection statement. If phones, documents or electronics must stay dry, use a separately rated protective container rather than relying on an unverified gear bag.
How should I separate wet and dry items in a dive bag?
Use separate compartments or removable inner bags when the product provides them. Otherwise, place wet equipment in a dedicated drainable or water-resistant liner and keep clothing, documents and electronics in their own protected containers. Do not assume that a divider is watertight unless the manufacturer states it. Remove wet equipment as soon as practical, then rinse and dry both the equipment and the bag before storage.
Can a dive bag be used as airline carry-on luggage?
Only if the packed bag meets the airline's current size, weight and contents rules. A bag sold as “travel size” is not automatically accepted as cabin baggage, and dive equipment can include items that need special handling or cannot enter the cabin. Check the operating carrier's rules for every flight segment before packing. Measure the filled bag, protect delicate equipment and allow for straps or handles that increase the external dimensions.
How should I protect a mask and delicate equipment inside a dive bag?
Keep the mask in a rigid or protective case and avoid placing heavy items on its lens, frame or skirt. Use appropriate padded protection for delicate equipment and prevent metal clips, buckles or tools from rubbing against lenses and displays. Pack fins in their natural shape and secure loose components so they cannot move through the bag. A large bag provides capacity, but it does not automatically provide impact protection for every item inside.
How do I clean and dry a diving gear bag?
Follow the bag's care label. Remove loose sand and debris, rinse salt from compatible materials and clean only with products permitted by the manufacturer. Open compartments and pockets, drain retained water and air-dry the bag fully away from strong direct heat before storage. Do not store wet equipment inside it. Inspect zippers, clips, straps, handles and seams for damage before the next trip.
What should I look for in a dive bag for boat or shore diving?
For boat use, consider the available deck space, drainage, secure handles and whether the bag can be identified easily without obstructing walkways. For shore diving, consider carrying distance, strap comfort, bag weight and the approach surface. In both cases, check usable dimensions, closure design, hardware and how wet equipment will be separated. Choose for the actual route and equipment list rather than buying the largest bag by default.
How should a diving hood fit?
A diving hood should fit closely without painful pressure, restricted jaw movement or excessive loose material. Check the forehead, face opening, chin, neck and any shoulder bib while turning the head and opening the mouth. Large gaps can allow more water movement, while an overly tight hood can be uncomfortable and interfere with equipment. Use the exact model's head measurement chart rather than assuming a wetsuit size gives the correct hood size. Browse diving hoods and caps by cut and listed thickness.
What thickness diving hood should I choose?
Choose hood thickness as part of the complete exposure system, considering the suit, water conditions, planned time in the water, activity and personal cold tolerance. There is no single temperature-to-thickness chart that suits every diver. Thicker material also changes fit and can affect head and neck movement, so the thickest option is not automatically the correct one. Follow the current wetsuit or drysuit and hood manufacturer's guidance.
What is the difference between a diving hood and a neoprene cap?
A diving hood usually covers more of the head and neck and may include a shoulder bib. A neoprene cap or beanie generally has a shorter cut and leaves more of the face, neck or chin uncovered. Product names vary, so compare the actual coverage, thickness, seams and intended use rather than relying only on “hood” or “cap” in the title. Choose the cut that works with the rest of the exposure suit.
Can I wear a separate diving hood with a wetsuit?
Yes, when the hood and wetsuit are designed to work together. Check how the neck or bib overlaps the suit and make sure the combination does not create painful pressure, large folds or restricted movement. Some suits have an attached hood, so adding another hood may not be supported. Follow the suit manufacturer's guidance and try the complete setup before entering the water.
Should I choose a diving hood with a bib?
A bib extends below the neck and is intended to overlap with a compatible wetsuit or drysuit arrangement. A hood without a bib can be simpler and less bulky around some suit collars. The appropriate choice depends on the exposure suit design, intended conditions and manufacturer guidance. Check the bib dimensions and overlap during a full fitting; do not assume that every bib fits correctly under or over every suit collar.
Are neoprene diving hoods waterproof?
Do not assume that an ordinary neoprene diving hood keeps the head dry. Most are wet-use exposure accessories and can allow water inside. Fit, face opening, seams and overlap affect water movement, but a close fit does not make the hood a dry system. If a dry hood or a hood compatible with a drysuit is required, follow the drysuit manufacturer's instructions and confirm the exact product type.
How do I measure my head for a diving hood?
Use the measurements requested by the exact model's size chart. This commonly includes head circumference around the widest part, but some hoods may also require neck or face measurements. Keep the measuring tape level and close without pulling it tight. If measurements fall between sizes, do not guess from a general hat size; ask for model-specific guidance and consider how the hood will overlap the exposure suit.
Why does water enter my diving hood?
Ordinary neoprene hoods are not necessarily designed to stay dry. Excessive flushing can result from an unsuitable size or face opening, folds, poor overlap with the suit, damaged seams or a hood shape that does not match the user. Inspect and refit the complete setup rather than tightening or modifying it without guidance. If staying dry is required, a standard wet-use hood is not a substitute for a compatible dry system.
How should I clean and dry a diving hood?
Follow the care label. A common routine is to rinse the hood thoroughly with fresh water after use, turn it as directed so both surfaces can drain and air-dry it in a ventilated place away from strong direct sunlight and high heat. Use only a cleaner approved for the material. Store the hood fully dry without sharply folding or crushing the face opening, neck or bib.
When should I replace a diving hood?
Inspect the material, seams, face opening, neck and bib before use. Replacement or qualified repair may be needed when there are open seams, significant tears, hardened or permanently compressed material, loss of shape or a fit that no longer works with the exposure suit. Small damage should be repaired only with a method suitable for the material. Do not rely on a hood that causes painful pressure or cannot remain correctly positioned.
No matching question. Try a shorter product or topic name.
