Wetsuit FAQs
Answers about wetsuit thickness, sizing, fit, styles, washing, drying and storage.
Find practical answers about wetsuit thickness, sizing, fit, styles, washing, drying and storage. The appropriate choice depends on the activity, conditions and exact model.
Browse all BURNSURF FAQ topics
What wetsuit thickness do I need?
Choose thickness from the activity, water and air conditions, session length, movement level, depth, suit coverage, fit and personal cold tolerance. A single temperature chart cannot guarantee comfort or safe exposure for every person. Compare the exact model's intended use and panel construction, then seek local professional guidance for diving, unfamiliar sites or cold conditions. The BURNSURF wetsuit thickness guide provides a step-by-step decision process without treating one thickness as universal.
How should a wetsuit fit?
A wetsuit should sit close to the body with minimal large gaps or folds, especially at the neck, lower back, wrists and ankles, because excessive water movement can reduce its effectiveness. It should not restrict normal breathing, cause painful neck pressure or prevent the shoulder, hip and knee movement required for the activity. Check the model-specific chart, pull the suit fully into position and repeat movement tests before deciding. Snug does not mean selecting the smallest size regardless of body shape.
How do I measure myself for a wetsuit?
Use the measurements requested by the exact model's chart, commonly height, weight, chest, waist and hips, and measure over light clothing with the tape level and not pulled tight. If measurements fall across different sizes, do not choose from height or normal clothing size alone; torso length and chest fit can materially change comfort and flushing. Ask which measurement controls the fit for that model and whether short, tall or other alternative cuts exist. Size labels are not standardized across every supplier or product.
Should I choose a full wetsuit, shorty, top or two-piece suit?
Choose coverage together with thickness. A full suit provides continuous arm and leg coverage; a shorty leaves more skin exposed and may favor mobility in warmer conditions; a top or vest targets the torso; and a two-piece system adds flexibility but creates overlap and different entry points. Compare the activity, exposure time, sun or abrasion needs, movement and fit at every opening. Two products with the same thickness label can perform differently when their coverage, seams and water-entry points differ.
What is the difference between a surfing wetsuit and a scuba-diving wetsuit?
They may differ in cut, panel layout, flexibility, thickness distribution, seals and intended operating conditions. Surfing emphasizes repeated overhead paddling and surface exposure, while scuba use adds depth, pressure and often lower movement levels. Neoprene can compress at depth, so equal thickness labels do not prove equal diving performance. Divers Alert Network discusses these design and depth considerations. Confirm that the exact model is intended for the planned activity.
How should I wash a wetsuit after use?
Follow the model's care label first. As a general routine, rinse the inside and outside thoroughly with clean fresh water after saltwater, pool or contaminated-water exposure. Avoid bleach, solvents, washing-machine cycles or cleaners not approved by the manufacturer. Work zippers gently and remove trapped sand without forcing them. If a dedicated wetsuit cleaner is used, follow its dilution and rinsing instructions. Divers Alert Network gear-care guidance also emphasizes fresh-water rinsing and protection from ultraviolet exposure.
What is the best way to dry and store a wetsuit?
Dry it in a shaded, ventilated place away from direct heat and prolonged sunlight. Turn it as needed so both sides dry, and use a wide hanger or the storage method specified by the manufacturer to avoid concentrating weight at the shoulders. Store it fully dry without tight folds, crushing or heavy objects on top. Do not leave it for long periods in a hot vehicle, sealed wet bag or damp container. Check that the zipper and hook-and-loop areas are clean before storage.
When should a wetsuit be repaired or replaced?
Inspect for tears, open seams, damaged zippers, loose panels, hardened or permanently compressed material and a fit that no longer limits excessive flushing. Small damage may be repairable with a method approved for the material, but do not use household glue or stitching that could enlarge the defect. Replace or professionally assess the suit when damage is extensive, a critical closure or seal fails, the material has lost pliability or the suit no longer provides the fit and exposure protection needed for its intended use.
What should you wear under a wetsuit?
What you wear underneath depends on comfort, hygiene, the activity and whether the suit is shared or rented. Many people use swimwear, a rash guard or a thin purpose-made base layer. The layer should not create large folds, painful pressure or a loose fit that increases water movement. Avoid bulky clothing that changes the wetsuit's fit or restricts movement. For rental use, follow the operator's hygiene policy. If extra warmth is needed, use a compatible layer designed for the activity rather than assuming ordinary clothing will work safely.
Do wetsuits keep you completely dry?
No. A standard wetsuit is designed to allow a small amount of water in and reduce water movement near the body; it is not intended to keep the wearer completely dry. Fit, seals, seams and zipper design affect how much flushing occurs. A drysuit uses a different construction and requires appropriate training and maintenance, especially for diving. If staying dry is essential, do not choose a product simply because a listing calls it a diving suit—confirm whether the exact model is a wetsuit, semi-dry suit or drysuit and what it is designed to do.
What do wetsuit thickness numbers such as 3/2 and 5/4 mean?
The numbers normally describe neoprene thickness in millimeters across different parts of the suit. In a 3/2 suit, the torso is commonly about 3 mm and the arms and legs about 2 mm; a 5/4 suit uses thicker panels. The exact panel map can vary by manufacturer, so check the specification for the selected model. Thickness affects warmth, flexibility and fit, but it is not a complete temperature rating. Seams, seals, lining, wind, activity, water conditions and personal cold tolerance also matter. Use the BURNSURF wetsuit thickness guide as a starting framework.
Do wetsuits stretch or become looser over time?
Neoprene and laminated fabrics can relax with use, while repeated stretching, heat, ultraviolet exposure and poor storage can gradually reduce elasticity. A small amount of break-in may be normal, but a suit should not be purchased painfully tight in the hope that it will become the correct size. Excessive looseness, permanent folds or material that no longer returns to shape can increase water movement and indicate wear. Follow the exact size chart, test normal movement and store the suit without sharp folds or narrow-hanger stress. Replace or professionally assess it when fit has changed substantially.
How can I tell if a wetsuit is too tight?
A wetsuit is too tight if it causes pain, numbness, tingling, restricted breathing, dizziness or prevents normal shoulder, hip and knee movement. It should be snug with minimal large gaps, but the neck should not choke and the zipper should close without excessive force. Test reaching overhead, bending, squatting and taking a full breath. Localized pressure at the neck, armpits, crotch or knees should not be ignored. Sizing varies by model, so a familiar size label is not enough. If the correct measurements still produce poor fit, try another cut rather than forcing the suit.
Should a wetsuit feel tight around the neck?
The neck should seal closely enough to limit flushing, but it should not cause choking, pain, numbness or difficulty breathing or swallowing. Check for rolled material, trapped hair, an incorrectly positioned zipper flap or a closure adjusted beyond its intended range. A neck that feels acceptable while standing may become uncomfortable during paddling or head movement, so test the intended motions. Do not cut or permanently stretch the neck without model-specific guidance because that can damage the seal and material. If pressure remains excessive, choose another size or neckline design.
Why does water get inside a wetsuit?
Most wetsuits are designed to allow a thin layer of water inside; body heat warms that water while the suit reduces circulation. Noticeable flushing can result from loose openings, gaps at the lower back or armpits, folds, an unsuitable cut, worn seals, open seams or a zipper that is not closed correctly. Inspect the complete fit and condition rather than assuming the suit should remain dry. Water entering during a fall or through an opening does not by itself prove a defect. If staying dry is required, a standard wetsuit is not a substitute for an appropriate drysuit system.
Why does my wetsuit smell even after rinsing?
Odor can remain when sweat, salt, organic material or cleaning residue is trapped in the lining, or when the suit dries too slowly in a poorly ventilated space. Rinse both sides promptly, use only a wetsuit-compatible cleaner when the care label permits it, rinse again and allow the suit to dry fully in moving air away from direct heat and strong sunlight. Clean the zipper and hook-and-loop areas where debris collects. Do not mask persistent odor with bleach, solvents or household fragrance. If mildew, material breakdown or skin irritation is present, stop using the suit and seek product-specific advice.
Can you wash a wetsuit in a washing machine?
Usually not unless the exact care label explicitly allows it. Machine agitation, spin cycles, hot water and ordinary detergent can stress seams, coatings, zippers and laminated materials. The safer general approach is hand rinsing or soaking in cool or lukewarm fresh water with a cleaner approved for wetsuits, followed by thorough rinsing and air drying. Do not assume a gentle cycle is safe for every model. Follow the supplied instructions first. PADI's wetsuit care guidance also recommends controlled cleaning rather than treating the suit like ordinary clothing.
Can you put a wetsuit in a dryer?
Do not tumble-dry a wetsuit unless the manufacturer expressly allows it. Dryer heat and tumbling can damage neoprene, adhesives, seam tape, zippers and surface fabrics, and the damage may not be immediately visible. After rinsing, let excess water drain and air-dry the suit in a shaded, ventilated place away from heaters and other direct heat. Dry the inside first when the care instructions support turning it inside out, then finish the other side. Faster is not always safer: choose airflow and time rather than high temperature.
How long does a wetsuit take to dry?
Drying time varies from several hours to more than a day depending on thickness, lining, humidity, airflow, temperature and how much water remains in the suit. Thick or internally lined suits take longer, and cuffs, knees and folded areas can stay damp after the surface feels dry. Hang or position the suit as directed, open the zipper, separate overlapping panels and use shaded ventilation. Do not store it until both sides and the seams are fully dry. Avoid promising a fixed drying time; check the suit itself before packing it away.
Can you hang a wetsuit on a regular clothes hanger?
A narrow wire or thin plastic hanger can concentrate weight at the shoulders and leave permanent stretching or creases, especially when the suit is wet. Use a wide wetsuit hanger or follow the manufacturer's recommended drying method. Some heavy suits are initially folded over a broad rail or hanger at the waist so the full wet weight is not suspended from the shoulders. Keep the suit away from sharp edges, direct sunlight and heat. For long-term storage, use a broad hanger or a loose, manufacturer-approved fold without placing heavy objects on top.
How can I put on a wetsuit more easily without damaging it?
Start with the correct size and a fully opened zipper or entry. Work gradually from the ankles upward, moving small sections of material instead of pulling hard from the top. Position the knees, hips and crotch before inserting the upper body, then ease each sleeve into place. Use the flats of the fingers rather than digging in with fingernails, rings or sharp objects. A thin changing sock or manufacturer-approved dressing aid can reduce friction, but oils and household lubricants may damage materials. If extreme force is required, stop and recheck the size and entry method.
What is the easiest way to take off a wetsuit?
Move to a stable place, fully open the zipper or entry and peel the suit down gradually rather than pulling on one seam or cuff. Free one shoulder and arm at a time, then work the material past the hips, knees and ankles in small sections. Avoid standing on the suit, scraping it against rough ground or using sharp tools. A changing mat can keep sand and grit away from the lining. If the suit repeatedly jams at one area, check fit and the removal method instead of forcing it, because excessive stretching can damage seams and seals.
Why does my wetsuit cause chafing?
Common causes include an incorrect fit, folds, a rough seam, trapped sand or salt, repeated movement and friction at the neck, armpits or groin. Rinse the suit and skin, inspect the area for damaged lining or seams, and check that the suit lies flat during the movements used for the activity. A compatible rash guard or manufacturer-approved anti-chafe product may help, but it should not be used to hide a poor fit or damaged suit. Stop if the skin is broken or irritation continues, and obtain medical advice for significant or persistent symptoms.
Can a small tear in a wetsuit be repaired?
Some small, clean neoprene tears can be repaired with a material-compatible product and method, but location and construction matter. Damage near structural seams, seals, zippers or heavily stretched areas may require professional repair. First rinse and dry the suit, then follow the suit manufacturer's instructions and the repair product's directions. Do not use household superglue, heat or stitching that was not designed for neoprene. A repair should lie flat and withstand gentle movement before the suit returns to use. Replace or professionally inspect material that is brittle, delaminating or extensively torn.
Can a wetsuit be altered if it does not fit correctly?
Specialist alteration may be possible, but it is not appropriate for every suit or problem. Changes to the torso, limbs, neck, seals or zipper can affect warmth, strength, water movement and warranty coverage. New suits with poor overall proportions are usually better exchanged for another size or cut before use. If alteration is considered, use a repairer experienced with the exact neoprene, lining and seam construction, and identify the activity and pressure points clearly. Do not cut the neck, cuffs or ankles as an improvised fit solution without manufacturer approval.
Can you swim in a surfing or diving wetsuit?
You can swim in many wetsuits, but a suit designed for surfing or scuba diving may feel less flexible through repeated swimming strokes than a swimming-specific suit. Thickness, shoulder cut, buoyancy, zipper placement and water entry all affect comfort and technique. Confirm that the model permits the intended use and practise in controlled water before open-water swimming. Extra buoyancy can change body position and does not replace swimming ability or required safety equipment. For organized events, check the organizer's rules on suit thickness, coverage and water temperature.
Do I need a wetsuit for snorkeling?
Not always. The decision depends on water temperature, time in the water, sun and abrasion exposure, current, personal cold tolerance and local operator requirements. A thin suit or exposure top may provide coverage in warm water, while cooler or longer sessions can require more insulation. Thickness alone is not enough; fit, seams and the complete exposure system matter. A wetsuit is not a life jacket and should not be relied on as one. Check local conditions and choose a model intended for the activity rather than copying another person's temperature recommendation.
Can you wear a wetsuit in a swimming pool?
Only when the pool permits it and the suit is suitable for the session. Pool chemicals, especially repeated chlorine exposure, can accelerate fading, loss of elasticity or material breakdown, while a thick suit can cause overheating during continuous swimming. Ask the facility about its rules, choose the least insulation appropriate for the activity and rinse the suit thoroughly with fresh water immediately afterward. Do not assume that a suit suitable for the ocean has the same service life in a chlorinated pool. Follow the exact care label for chemical exposure.
Does a wetsuit make you more buoyant?
Neoprene normally adds some buoyancy because its structure contains gas cells, but the amount varies with thickness, material, suit coverage, depth, wear and compression. A thicker suit can change trim and the amount of weight a diver needs, while swimmers may notice a higher body position. Do not calculate safety or diving weights from a generic figure. Divers should perform the appropriate weighting check with the complete equipment configuration and qualified supervision. Wetsuit buoyancy is not a substitute for a life jacket, buoyancy-control device or required flotation equipment.
What is neoprene, and are all wetsuits made from the same material?
Neoprene is a family of synthetic-rubber foams commonly used for thermal insulation in wetsuits. A finished suit can combine different foam densities, thicknesses, linings, stretch fabrics, seam constructions and coatings, so two suits labeled “neoprene” may fit and perform differently. Some manufacturers also use alternative foams or plant- and mineral-derived components in proprietary materials. Do not infer warmth, flexibility, durability or environmental impact from one material word alone. Compare the exact product specification, thickness map, lining, seams, fit and care instructions for the selected model in the diving suit collection.
No matching question. Try a shorter product or topic name.
