← All FAQ topics

Diving Mask, Fin & Footwear FAQs

Answers about choosing and caring for diving masks, fins, boots and gloves.

Find practical answers about selecting, fitting, using and caring for diving masks, fins, boots and gloves.

Browse all BURNSURF FAQ topics

How do I know if a diving mask fits properly?
A diving mask should sit comfortably with the skirt resting evenly against the face and no obvious gaps. Place it against a dry face without using the strap and inhale gently through the nose; it should form a temporary seal without continuous suction. Then fit the strap loosely and check that the frame, nose pocket and skirt do not create painful pressure. If possible, repeat the check while holding a snorkel or regulator mouthpiece because this can change the shape of the face. Read our diving mask selection guide before comparing current models.
Why does my diving mask leak?
Common causes include an unsuitable skirt shape, hair trapped under the seal, a folded or damaged skirt, facial hair, or a strap that is overtightened or positioned incorrectly. A mouthpiece can also change the seal around the nose and cheeks. Inspect and refit the mask on a dry face before changing size. Tightening the strap harder is not a reliable solution and can deform the skirt. If the skirt or strap is cracked, stiff or torn, follow the manufacturer's replacement guidance rather than continuing to rely on it.
How can I stop a diving mask from fogging?
Follow the mask manufacturer's preparation instructions first because lens materials and coatings differ. Before use, keep the inside lens clean and apply a product-approved mask defog solution as directed, then rinse only as instructed. Avoid touching the inside surface after preparation because skin oils can contribute to fogging. Do not use a flame, abrasive cleaner or unapproved household chemical on a mask, especially when the lens has a coating. Persistent fogging can also accompany water leakage, so check the fit and skirt seal as well as the lens preparation.
What size diving fins should I buy?
Use the size chart for the exact fin model and check whether it assumes bare feet, neoprene socks or diving boots. Normal shoe size is only a starting point because foot-pocket shapes vary. The foot should enter fully without the toes being crushed, the arch being pinched or the heel moving excessively. Open-heel fins should be fitted with the exact boots that will be used because boot thickness and sole volume can change the required pocket size. See our guide to choosing diving fins for the complete fitting sequence.
Should I choose full-foot or open-heel diving fins?
Choose according to the activity, entry route and footwear. Full-foot fins slip on like a shoe and are commonly fitted to bare feet or thin compatible socks. Open-heel fins use an adjustable heel strap and are commonly fitted over compatible diving boots. Open-heel construction can be practical when boots are needed for the entry route or exposure system, but the strap does not make every boot-and-fin combination compatible. Confirm the intended use and test the complete combination before buying. Browse the current diving fins collection without assuming that every listing suits both setups.
Can diving fins be worn with neoprene socks?
They can be worn with neoprene socks only when the fin manufacturer supports that use and the combined fit remains secure and comfortable. Socks add material around the foot, which can make a full-foot pocket tighter or change heel retention. Test the exact sock thickness with the exact fin and check for toe pressure, arch binding, rubbing and excessive movement. Do not force a thick sock into a pocket designed for bare feet. Compare diving socks separately, then verify compatibility with the selected fin.
How should diving boots fit?
Diving boots should feel close and stable without curling the toes, strongly compressing the foot or allowing excessive heel lift. Try them with the same sock or drysuit layer planned for use, stand with full weight on both feet and flex the ankle. Walk a few steps and check the widest part of the foot, instep, heel and top edge for pressure or rubbing. If the boots will be used with open-heel fins, repeat the fit check inside the actual foot pocket. Use our diving boot selection guide for the full checklist.
What thickness diving boots should I choose?
Choose boot thickness as part of the complete exposure system, taking account of the suit, water conditions, planned time in the water, activity and personal cold tolerance. There is no single temperature-to-thickness rule that suits every user. A thicker boot also adds bulk, so confirm that it still fits the intended fin pocket without squeezing the foot. Check that the stated thickness applies to the selected variant and follow the current guidance supplied with the wetsuit or drysuit and fins.
Do I need diving boots with open-heel fins?
Many open-heel diving fins are intended to be used with compatible boots, but the requirement is model-specific. Check the fin manufacturer's instructions rather than relying only on the open heel and adjustable strap. Fit the fins while wearing the exact boots and confirm that the boot enters fully, the toes and instep are not compressed, the heel strap sits correctly and useful adjustment remains. A different boot thickness, sole or size can require a different foot-pocket size. Compare diving boots and fins as one fit system.
What is the difference between diving boots and neoprene socks?
Diving boots generally have a shaped upper and a separate, more structured sole. Neoprene socks are usually softer and less structured and may be used inside compatible full-foot fins. Product naming varies, so compare the actual sole, cut, thickness and intended use rather than relying on the title alone. Socks should not be assumed to provide the same underfoot structure as boots, while soled boots should not be forced into a fin pocket designed for bare feet or thin socks. Browse diving shoes and diving socks as separate categories.
How tight should a diving mask strap be?
The strap should hold the mask in position without creating painful pressure or visibly deforming the skirt. The skirt, not extreme strap tension, creates the seal. Start with the strap level on the back of the head and tighten it only enough to keep the mask stable. If tightening makes the leak worse, remove the mask, check for trapped hair or a folded skirt and repeat the dry fit test. A mask that needs excessive tension may not match the user's face shape. See our diving mask fit guide for the full selection process.
Can I wear glasses with a diving mask?
Ordinary eyeglasses usually interfere with the skirt seal and may not fit safely inside a standard diving mask. Some mask models accept replaceable corrective lenses or compatible optical inserts, while others do not. Confirm compatibility before buying and use a current prescription when selecting corrective lenses. If you are considering contact lenses, discuss the intended diving use and personal eye-health needs with an eye-care professional and your dive professional. Do not assume that a similar-looking mask can accept the same lens system.
Can I use the same mask for snorkeling and scuba diving?
Only when the mask manufacturer identifies it as suitable for both activities. A scuba mask needs an enclosed nose pocket so the diver can equalize the mask air space during descent, and the lens and construction must be intended for diving. A mask sold only for surface swimming or snorkeling should not automatically be treated as scuba equipment. Confirm intended use, fit and lens information for the exact model before taking it below the surface. Browse diving masks by their stated use rather than appearance alone.
How should I clean and store a diving mask after use?
Follow the model's care instructions. A common routine is to rinse the mask thoroughly with fresh water, remove salt and debris, allow it to air-dry away from strong direct sunlight and store it in a protective case without folding the skirt. Do not place the mask lens-down or pack heavy equipment on top of it. Avoid solvents, hot water and unapproved cleaners because lens coatings, skirts and frames differ. Check that the mask is fully dry before long-term storage.
When should I replace a diving mask or mask strap?
Inspect the skirt, strap, buckles, frame and lens before use. Replace a damaged component when it is cracked, torn, badly deformed, unreliable or no longer holds the intended adjustment, following the manufacturer's parts guidance. A skirt that has become stiff or permanently distorted may no longer seal correctly. Do not continue using a mask with a loose or damaged lens or frame. If only the strap or buckle is replaceable, confirm that the spare part fits the exact mask model rather than choosing it by appearance.
Are diving fins supposed to feel tight?
Diving fins should feel secure, not painfully tight. The foot should enter the pocket without crushed toes, arch pressure, numbness or strong rubbing, and it should not move excessively when the leg is gently shaken. Fit them with the same bare foot, sock or boot planned for use. Water will not correct a pocket that is already painful during a dry fitting. Use the exact model's size chart because fin-pocket shape and sizing vary. Our diving fin guide includes a step-by-step fit check.
Why do diving fins rub my feet or heels?
Rubbing can result from an unsuitable pocket shape, excessive movement, a pressure point, a rough edge or footwear that changes the fit. Check whether the fin is intended for bare feet, socks or boots and inspect the pocket for damage or trapped debris. A thin compatible neoprene sock may help in a fin designed to allow one, but it also takes up space and can make a tight pocket worse. Stop using a combination that causes pain or skin damage and refit the complete setup before the next session.
What fin blade length should I choose?
Choose blade length for the activity and environment rather than assuming that longer is better. Shorter blades can be practical for pool training, travel and some recreational use. Standard recreational diving fins balance portability with the intended scuba or snorkeling design. Long freediving blades are a specialized category and require more clearance, a suitable kicking technique and appropriate training. Also consider blade stiffness and the user's ability to control the fin. Confirm the stated activity on the exact product page before ordering.
How should I pack diving fins for travel?
Rinse and dry the fins before packing. Keep the blades flat or in their natural shape and avoid leaving them sharply bent under heavy luggage. Protect adjustable straps, buckles and foot-pocket edges from crushing or snagging, and follow any model-specific storage instructions. Confirm airline baggage limits separately because dimensions and fees vary by carrier and route. On arrival, inspect the blades, straps and buckles before use rather than assuming that equipment remained undamaged in transit.
How do I clean and store diving fins?
Follow the manufacturer's care instructions and rinse the fins with fresh water after use, paying attention to the foot pockets, straps and buckles. Allow them to dry away from strong direct sunlight and store them flat or in their natural shape in a cool, dry place. Do not leave the blades folded, twisted or compressed for long periods. Before the next use, inspect adjustable straps and buckles for tears, cracks or unreliable movement and replace compatible parts as directed.
Should I choose soft-sole or more structured diving boots?
Choose the sole according to the route into the water and the intended fin pocket. A flexible, lower-profile sole may be easier to place in some foot pockets and can suit an easy boat or beach entry. A more structured sole may be preferable for longer walks or uneven shore approaches, but it also occupies more fin-pocket space. A visible tread pattern is not proof of certified slip or puncture resistance. Compare the physical construction and verify the exact boot-and-fin fit using our diving boot guide.
Should I choose high-cut or low-cut diving boots?
Choose according to the exposure system, ankle coverage, entry route and ease of putting the boots on. Low-cut boots are compact and leave more of the ankle uncovered. High-cut boots extend farther up the ankle and may use a zipper or gusset for entry. Check how the top overlaps the wetsuit leg and whether the edge or closure rubs when the ankle flexes. Boot height alone does not establish warmth, support or water sealing. Compare the complete construction and stated intended use.
Are zippered or pull-on diving boots easier to use?
That depends on the boot opening, material, fit and the user's mobility. A zipper can open the upper for entry, but it adds a closure that should be checked for smooth operation, pressure points and secure fastening. A pull-on boot has fewer closure parts, but it still needs an opening that can be used without overstretching the material. Try the exact model with the planned suit layer and wet hands if possible. Neither construction is automatically more durable or better sealed.
Can I wear diving boots without fins?
Some diving boots can be used for walking to the water or for surface water activities when the manufacturer lists those uses, but suitability depends on the sole, upper and environment. Do not assume that every thin boot provides enough structure for rocks, long walks or sharp surfaces. Check the intended activity and inspect the sole before use. When the boots will also be worn with fins, confirm that any additional sole structure still fits the foot pocket. Browse the diving shoes collection by stated use.
How should I clean and dry diving boots?
Follow the product's care label. A common post-use routine is to rinse the boots inside and out with fresh water, drain them and air-dry them in a ventilated place away from strong direct sunlight or high heat. Open a compatible zipper or closure as directed so trapped moisture can escape. Do not use a washing machine, tumble dryer, heater or chemical cleaner unless the manufacturer explicitly permits it. Store the boots only when dry and avoid crushing the sole or upper out of shape.
Do I need diving gloves?
That depends on the water conditions, exposure system, intended activity and local rules. Gloves may be selected for thermal coverage or a specific task, but they do not make it acceptable to touch coral or marine animals. Some dive locations restrict glove use, so check the operator and destination rules before the trip. If gloves are needed, compare the stated use in the diving gloves collection and confirm that the fit still allows the required hand movements and equipment operation.
How should diving gloves fit?
Diving gloves should fit closely without painful pressure, numbness or restricted circulation. The fingertips should reach the ends without being crushed, and excess material should not bunch at the palm or interfere with buckles, clips or controls. Flex the fingers, make a fist and operate representative equipment during a dry fitting. Gloves that are too loose can shift and reduce dexterity, while gloves that are too tight can restrict comfortable movement. Use the exact model's hand-measurement chart rather than relying only on a normal glove size.
What thickness diving gloves should I choose?
Choose thickness as part of the complete exposure system and consider water conditions, time in the water, activity, required dexterity and personal cold tolerance. Thicker neoprene generally adds material around the hand and can reduce fine finger movement, so the thickest option is not automatically the best choice. There is no single temperature chart that works for every diver and activity. Follow the current suit and glove manufacturer's guidance and test whether you can operate essential equipment while wearing the selected gloves.
Are neoprene diving gloves waterproof?
Do not assume ordinary neoprene diving gloves keep the hands dry. Many are wet-use gloves that can allow water inside. A dry-glove system is a different setup and must be compatible with the drysuit and wrist-seal system. Check the exact product description and exposure-system instructions before ordering. Terms such as “water gloves” or “cold-water gloves” do not by themselves establish that a glove is watertight.
How should I clean and dry diving gloves?
Follow the care label and rinse the gloves thoroughly with fresh water after use. Drain them and air-dry them in a ventilated place away from strong direct sunlight, heaters and other high heat. Do not machine-wash, tumble-dry or use an unapproved cleaner unless the manufacturer permits it. Make sure the inside is dry before storage, and do not leave the gloves tightly folded. Inspect the fingertips, seams, wrist area and closures before the next use.

Contact BURNSURF about a specific product or order

No matching question. Try a shorter product or topic name.